Innocoat Reactafil LS Densifier
MSDS
Nano Lithium Silicate concrete densifier and hardener with deep penetration.  

Innocoat Reactafill penetrates deep into the concrete and reacts quickly with the soluble calcium carbonate compounds to create a breathable protective barrier while at the same time strengthening the floor surface. Being a nano lithium silicate this process is faster with greater coverage than other silicates.

Innocoat Reactafill densifies and hardens the surface wear layer to prevent flaking or peeling, efflorescence is eliminated and surface dusting is prevented. Quick and easy to apply, Innocoat Reactafill is non toxic with no odour, safe to use in food handling areas, has high abrasion resistance and is stain and water resistant.

Innocoat Reactafil can be used on both new and old concrete - however it must be noted that it will not improve the hardness of concrete that is already dusting or disintegrating.

Innocoat KL340 Densifier
Product Guide
Product Guide
MSDS
KL340 Densifier is a Potassium/Lithium silicate penetrating densifier which is used to impregnate and densify concrete.

Designed to penetrate the pores and react with the Calcium Hydroxide in the concrete Innocoat KL340 fuses with the CSH ( calcium silicate hydrate) forming a gel that hardens to densify the concrete. Moisture permeability and efflorescence are reduced, the concrete is stronger and protected against damage from oils, grease, water and other substrates.

Innocoat KL340 can be used to cure and densify new concrete or to penetrate existing concrete to improve strength and assist in crack prevention.

Innocoat KL340 is water based, non toxic, environmentally friendly, with no odour and easy to apply .

Innocoat KL340  also works against staining, mould & mildew, oils, water migration, animal excrement, concrete dusting, algae and bacteria. 

Innocoat Natural Repel
Product Guide
Product Guide
MSDS
Natural Repel  penetrates, cures and seals new or existing concrete.

Ecofriendly Innocoat Natural Repel eliminates dusting and improves abrasion resistance while retaining the natural nonslip surface. Natural Repel's unique colloidal properties bond with the CSH ( calcium silicate hydrate) leaving the concrete stronger and more impervious to wear and staining. 

Innocoat Natural Repel is easy to apply, non toxic and can be trafficked on as soon as the surface is dry.

Ideal for any concrete structure, factory floors, garages, driveways, pavers, bench tops, patios, foundations.